COMPLETE GUIDE TO GRASSCUTTER FARMING AND MANAGEMENT


Agriculture is a very lucrative profession; everyone needs food because food is one of the basic needs of life; if I say food, not just any food but quality food. This is what the body needs to serve us better. This is why farming is the profession for all and sundry, we are just pretending.
Animal protein is very important to the body, there are many sources of animal protein, poultry bird is the common source but there are other sources. Grasscutter is another good source, this micro livestock has turned many to millionaires over time.
What is a grasscutter?
Grasscutter, botanically called Thryonomys swinderianus and commonly called the Greater cane rat, is a micro livestock widely found in the grasslands, wet or marshy areas in Africa. They used to be widely hunted but they can now be domesticated for commercial purpose. Grasscutters are highly prolific animals as they are sexually matured and able to reproduce at around five to six months, with litter size of about twelve (12) in a year. They are easy to manage and grow faster under intensive system with the production of quality protein.
For you to start up a grasscutter business or any livestock business, housing is the first factor you must consider. Housing is key to grasscutter business.
Grasscutter Housing
The type of house to keep grasscutter must be safe and able to protect the animals for adverse weather, external threats like flood and predators. The house must be well ventilated. Grasscutters are best raised under intensive housing system, this increases their growth rate. The capacity of the house depends on the size and numbers of the animals to be reared. The space requirement for a group of reproductive grasscutters comprising one adult male and four females is 1.6m² to 2m² and The recommended surface area per adult animal in the pen is 0.2 m².
Materials for construction of the pen.
To construct a pen that is conducive for the growth and well-being of the animals, the building should be well ventilated and facilitates enough light to enhance rearing activities. The long sides of the structure are made of a low wall of about 1.5 m high, with the upper half covered with chicken wire. The roof can be made out of corrugated iron, straw or any other kind of waterproof material. The layout of the pens depends on the type of material used for their construction. Metal pens can be moved around, whereas brick pens will be fixed.
It is not recommended to use materials such as straw, bamboo, wood or matting because they can easily be eaten away by the grasscutters. There are basically two types of grasscutter farming cage; they are:
• The open pen
• The Closed pen.
The open pen: Open pens are those pens that are enclosed without any covering on top, and with a surface area of about 3 m² and 1.5 high. There is an opening in the side that gives easy access to the farm and animals.
The closed pen: These are pens that are covered with appropriate roofing material, and may be divided into different compartments. The height of the wall is lower (80 cm) and the surface area can vary between 2 and 3 m². The floor inside the building should be smooth and free from holes and crevices.
Also, there is a particular cage designed for easy handling, it's called the squeeze cage.
The squeeze cage is a compacted cage used to handle the animals more easily. The cage is designed such that its dimension is almost the same as the animal to be handled. The farmer can design this cage by building a rectangular cage with fine meshed screening. The size of the cage should base on the average weight of the animals in question. The squeeze cage should be built in such a way that the animal cannot turn around inside the cage.
Feeders and drinkers are component of any animal pen; feeding and drinking troughs can be made of cement or clay, and should be heavy enough so that the grasscutters cannot displace them. These are easy to make; all that is needed is to make a mould out of wood or other scrap material. Design one trough per three grasscutters.
Growth and maturity
Growth and maturity are quite crucial in this venture because it aids reproduction processes and planning.
A male grasscutter is sexually matured at 8 months reaching a minimum weight of 2.5kg. By nature, female animals mature rapidly. A female grasscutter is sexually matured at 26 week with a minimum body weight of 1.8kg.
During stocking, a male is enough to serve 10 females as the presence of male triggers the ovulation of the female. The gestation period of a grasscutter is approximately 22 weeks, meaning that a grasscutter can only reproduce twice in a year. A Grasscutter reproduces at least four offsprings per reproduction. These young animals suckle for 49 days before weaning.
Breed selection
It is crucial to select good breeds for stocking; breed selection should not be done at random. The selection should be made on the basis of weight; the male should be 0.5 to 1 kg heavier than the females. Male and female that are closely related should not mate, but females of the same parent can be bred alongside with a male of another parent. Animals in good conditions should be stocked, animals with rough coat or skin should be avoided, so also animals with weepy eyes.
The male grasscutter can mate with several females in a single period. The male, who can be identified by his wrinkled and brown genitals, is placed first in the pen so that it can mark his territory and thereby reduce the risk of fighting. The female, identified by the closeness of the anus to the genital area, is put in the pen with the male for 24 hours.
During the mating session, make sure the male is heavier than the female. There are generally two options for mating in captivity:
• Permanent mating: in this option, the male and females are kept together in the same pen, and only the young are removed after weaning.
• temporary mating: In this type, The female is placed in the same pen with the male at a particular point in time, and removed once the female is pregnant.
Each of these options looks interesting but comes with individual pros and cons depending on production goal.
In permanent mating, the breeding cycle of the female grasscutter is increased but the associated problems are:
• High rate of cannibalism.
• Inability to identify the mother of each offspring.
• There is less control of over production as there is regular mating among animals.
However, in temporary mating, there is little sense of organization here; there is full control of the animals’ affairs. The advantages of these options are:
• There is reduced risk of cannibalism.
• The mother of each offspring can be traced for other management practices.
For this to effectively take place, there are some basic prerequisites which are termed disadvantages, they include:
• It requires space, thus, increasing the cost of production and maintenance.
• There is reduced number of litter per female per year due to the controlled mating between animals.
Management of pregnant grasscutter.
After mating, pregnancy is expected. The period of gestation for a grasscutter is about 5 months. Pregnancy can be tested using this simple method. It involves the use of cotton bud. After about 5-8 weeks of mating, insert the cotton bud inside the genital (vagina) of the female grasscutter. If the cotton bud turns reddish in color, it means the animal is pregnant but if the color if the cotton bud doesn’t change, it means the animal is not pregnant. Such animal can be introduced to the male again for servicing.
After about 5 months of pregnancy, the female animal delivers. After parturition, the female needs special care and attention. It must be served high quality feed and provision of clean and adequate water to aid milk production. After forty days of parturition, weaning generally takes place. Weaning is the separation of the mother from its younger ones or offspring, this is necessary because the mother will grow weak as a result of the prolonged feeding of its offsprings.
During weaning, the young males are separated from the females and put together with other males of the same weight. The male can be identified by the distance between the genitals and the anus, which is twice as large as that of the young female.
Handling grasscutter
At this juncture, I must confess to you. Handling grasscutter is not an easy task; they can be harmful if not properly handled. The mode of handling depends greatly on their size.
• To handle a young grasscutter:
It is first lifted with its tail and holding the base of its tail and then grabbing its back slightly with the other hand. The animal is therefore turned to its back while its tail is stretched out at the same time.
• To handle a medium sized grasscutter:
This is quite technical; the animal is lifted with its tail and supported by grabbing the back with the other hand so that the weight is not much on the tail. The animal is then turned to its back.
• To handle a large grasscutter:
This cannot be lifted easily so it is recommended to handle it with aid of a squeeze cage.
Feeding grasscutter
In livestock production, feeding is key. It accounts for about 70%-75% of the total cost of production. Animal should be fed with balanced ration daily; grasscutter feeds are mainly green forage but it can be supplemented with concentrate, high in energy, protein and minerals. Examples of grasscutter feeds are:
• Cassava
• Potato
• Yam
• Cassava peels and scraps.
• Moringa
• Corn
• Sorghum
• Millet
• Rice
• Powdered oyster
• Snail or egg shells, with bone meal
• Groundnut
• Dry bread
• Corn or sorghum bran
• Groundnut and palm kernel cakes
• Wheat bran
• Brewers’ dried grain
• Cores from the crowns of palm, coconut or pineapple trees or banana plants
• Green papaya
• The trunk of the papaya
• Bamboo shoots
• Leaves and tops from pineapples
For proper feed utilization, the animals should be served fodder two hours before serving concentrates, once or twice a day, preferably in the morning and evening. Do not give damp fodder, Grassy fodder should be sun dried at least 24 hours before being served.
Concentrate can be served singly or in combination with fodder. It could be one ingredient or in mixtures. If using single ingredient concentrates, make sure to alternate when you give them. However, if the concentrate is a mix of two or three ingredients, then the same concentrate can be given every time. Any changes in concentrates should be made over four to five days in order to allow the digestive system to adapt. Bones, shells and pieces of wood help to wear down the teeth. After burning, bones can be given in powder form, mixed in with the concentrate, and can provide a source of minerals, especially phosphorus and calcium.
Clean and fresh water should be made available at all time.
Disease Management
Just like all creatures, grasscutters also face health threats that tend to affect their performance. Routine and regular inspection of the pen facilitate the exposure of any health threat or deviation in the health condition of the animal. Inspection starts from the pen facilities, to detect any threat or changes in the environment that can be detrimental to the animal health. Also, careful observation of the animal is another form of inspection that helps to detect change in the physiology of the grasscutter.
Proper hygiene must be maintained in the pen. The feeding and drinking equipment have to be managed and kept clean as fine as possible, to prevent the invasion of harmful microorganisms and pests. Regular washing of the equipment has to be done to ensure good health management. Repellants should be used on the farm to chase away any hardened and surviving pathogen.
Increase in the immunity of the animal is key and has to be achieved, this can be achieved through the administration of vitamins, sweetened lemon juice and mineral supplements at a regular interval, say every two weeks.
Clinical signs or symptoms, that can be observed in a sick grasscutter.
Every disease condition comes with a sign, they include:
• Rough or jaded fur:
The fur is the outermost covering of the grasscutter; it indicates the health status of the animal. When the animal is healthy, the fur looks shinny and tender but when you start to notice an irregular pattern or rough coat; it means there is an issue. To curb this condition, check the feed quality; also check the housing for dampness and cold, because these might be the reason behind the rough fur.
• Death of suckling babies:
This is a big disaster in farming, seeing the young animals drop dead is so displeasing. This can chiefly be caused by cold but if not, check the quality of the feed you are serving the lactating female. Disinfect the pen and relocate the animals to another pen.
• Loss of weight:
This is a common sign of illness; the grasscutter becomes emaciated and less active. This is normally caused by poor quality of feed or a sore in the teeth of the grasscutter. However, if any of these is not the reason behind the ailment, deworm the animals and give them long acting antibiotics. Also, disinfect the pen.
• Unmoving animal prostrate:
When you observe this in your grasscutter ; cull the grasscutter and do a thorough examination of the animal, check for cuts, sores, abscesses etc. Give sweetened lemon juice or antibiotics.
• Lump under the skin of a grasscutter:
This is called abscess; it is the accumulation of waste in the blood. To treat this, puncture the abscess with a needle and evacuate it completely. Apply powered antibiotics and inject long acting antibiotics.
To prevent such from occurring, check the quality of feed served, disinfect the pen and always serve the animals sweetened lemon juice.
• Diarrhoea:
If you notice the anus of your animal is always dirty and defecates are watery, it means your animal has diarrhoea. It is commonly caused by poor feed quality and sudden change in the concentrate feed. To curb this; check the feed quality, serve the animal antibiotics and reintroduce roughages or fibre feeds.
• Coughing and nasal discharge:
This is caused by powdered feed and damp environment; apply fat to the feed to check the powdery and ensure the floor is dry at all times.
• For any wound or injury sustained through fighting or mishandling, treat the wound and apply antibiotics
Sweetened lemon juice is very good for animals; it improves their immune system and protect the animals from any infection or disease. It is used as a curative and preventive measure; it can be added to the drinking water on a daily basis.
Proper management of grasscutter is very important; it increases the productivity of the business and reduces the cost of production. To run a successful animal production business, the animals have to be in good condition with the support of a proper management practice.


Agriculture is a very lucrative profession; everyone needs food because food is one of the basic needs of life; if I say food, not just any food but quality food. This is what the body needs to serve us better. This is why farming is the profession for all and sundry, we are just pretending.
Animal protein is very important to the body, there are many sources of animal protein, poultry bird is the common source but there are other sources. Grasscutter is another good source, this micro livestock has turned many to millionaires over time.
What is a grasscutter?
Grasscutter, botanically called Thryonomys swinderianus and commonly called the Greater cane rat, is a micro livestock widely found in the grasslands, wet or marshy areas in Africa. They used to be widely hunted but they can now be domesticated for commercial purpose. Grasscutters are highly prolific animals as they are sexually matured and able to reproduce at around five to six months, with litter size of about twelve (12) in a year. They are easy to manage and grow faster under intensive system with the production of quality protein.
For you to start up a grasscutter business or any livestock business, housing is the first factor you must consider. Housing is key to grasscutter business.
Grasscutter Housing
The type of house to keep grasscutter must be safe and able to protect the animals for adverse weather, external threats like flood and predators. The house must be well ventilated. Grasscutters are best raised under intensive housing system, this increases their growth rate. The capacity of the house depends on the size and numbers of the animals to be reared. The space requirement for a group of reproductive grasscutters comprising one adult male and four females is 1.6m² to 2m² and The recommended surface area per adult animal in the pen is 0.2 m².
Materials for construction of the pen.
To construct a pen that is conducive for the growth and well-being of the animals, the building should be well ventilated and facilitates enough light to enhance rearing activities. The long sides of the structure are made of a low wall of about 1.5 m high, with the upper half covered with chicken wire. The roof can be made out of corrugated iron, straw or any other kind of waterproof material. The layout of the pens depends on the type of material used for their construction. Metal pens can be moved around, whereas brick pens will be fixed.
It is not recommended to use materials such as straw, bamboo, wood or matting because they can easily be eaten away by the grasscutters. There are basically two types of grasscutter farming cage; they are:
• The open pen
• The Closed pen.
The open pen: Open pens are those pens that are enclosed without any covering on top, and with a surface area of about 3 m² and 1.5 high. There is an opening in the side that gives easy access to the farm and animals.
The closed pen: These are pens that are covered with appropriate roofing material, and may be divided into different compartments. The height of the wall is lower (80 cm) and the surface area can vary between 2 and 3 m². The floor inside the building should be smooth and free from holes and crevices.
Also, there is a particular cage designed for easy handling, it's called the squeeze cage.
The squeeze cage is a compacted cage used to handle the animals more easily. The cage is designed such that its dimension is almost the same as the animal to be handled. The farmer can design this cage by building a rectangular cage with fine meshed screening. The size of the cage should base on the average weight of the animals in question. The squeeze cage should be built in such a way that the animal cannot turn around inside the cage.
Feeders and drinkers are component of any animal pen; feeding and drinking troughs can be made of cement or clay, and should be heavy enough so that the grasscutters cannot displace them. These are easy to make; all that is needed is to make a mould out of wood or other scrap material. Design one trough per three grasscutters.
Growth and maturity
Growth and maturity are quite crucial in this venture because it aids reproduction processes and planning.
A male grasscutter is sexually matured at 8 months reaching a minimum weight of 2.5kg. By nature, female animals mature rapidly. A female grasscutter is sexually matured at 26 week with a minimum body weight of 1.8kg.
During stocking, a male is enough to serve 10 females as the presence of male triggers the ovulation of the female. The gestation period of a grasscutter is approximately 22 weeks, meaning that a grasscutter can only reproduce twice in a year. A Grasscutter reproduces at least four offsprings per reproduction. These young animals suckle for 49 days before weaning.
Breed selection
It is crucial to select good breeds for stocking; breed selection should not be done at random. The selection should be made on the basis of weight; the male should be 0.5 to 1 kg heavier than the females. Male and female that are closely related should not mate, but females of the same parent can be bred alongside with a male of another parent. Animals in good conditions should be stocked, animals with rough coat or skin should be avoided, so also animals with weepy eyes.
The male grasscutter can mate with several females in a single period. The male, who can be identified by his wrinkled and brown genitals, is placed first in the pen so that it can mark his territory and thereby reduce the risk of fighting. The female, identified by the closeness of the anus to the genital area, is put in the pen with the male for 24 hours.
During the mating session, make sure the male is heavier than the female. There are generally two options for mating in captivity:
• Permanent mating: in this option, the male and females are kept together in the same pen, and only the young are removed after weaning.
• temporary mating: In this type, The female is placed in the same pen with the male at a particular point in time, and removed once the female is pregnant.
Each of these options looks interesting but comes with individual pros and cons depending on production goal.
In permanent mating, the breeding cycle of the female grasscutter is increased but the associated problems are:
• High rate of cannibalism.
• Inability to identify the mother of each offspring.
• There is less control of over production as there is regular mating among animals.
However, in temporary mating, there is little sense of organization here; there is full control of the animals’ affairs. The advantages of these options are:
• There is reduced risk of cannibalism.
• The mother of each offspring can be traced for other management practices.
For this to effectively take place, there are some basic prerequisites which are termed disadvantages, they include:
• It requires space, thus, increasing the cost of production and maintenance.
• There is reduced number of litter per female per year due to the controlled mating between animals.
Management of pregnant grasscutter.
After mating, pregnancy is expected. The period of gestation for a grasscutter is about 5 months. Pregnancy can be tested using this simple method. It involves the use of cotton bud. After about 5-8 weeks of mating, insert the cotton bud inside the genital (vagina) of the female grasscutter. If the cotton bud turns reddish in color, it means the animal is pregnant but if the color if the cotton bud doesn’t change, it means the animal is not pregnant. Such animal can be introduced to the male again for servicing.
After about 5 months of pregnancy, the female animal delivers. After parturition, the female needs special care and attention. It must be served high quality feed and provision of clean and adequate water to aid milk production. After forty days of parturition, weaning generally takes place. Weaning is the separation of the mother from its younger ones or offspring, this is necessary because the mother will grow weak as a result of the prolonged feeding of its offsprings.
During weaning, the young males are separated from the females and put together with other males of the same weight. The male can be identified by the distance between the genitals and the anus, which is twice as large as that of the young female.
Handling grasscutter
At this juncture, I must confess to you. Handling grasscutter is not an easy task; they can be harmful if not properly handled. The mode of handling depends greatly on their size.
• To handle a young grasscutter:
It is first lifted with its tail and holding the base of its tail and then grabbing its back slightly with the other hand. The animal is therefore turned to its back while its tail is stretched out at the same time.
• To handle a medium sized grasscutter:
This is quite technical; the animal is lifted with its tail and supported by grabbing the back with the other hand so that the weight is not much on the tail. The animal is then turned to its back.
• To handle a large grasscutter:
This cannot be lifted easily so it is recommended to handle it with aid of a squeeze cage.
Feeding grasscutter
In livestock production, feeding is key. It accounts for about 70%-75% of the total cost of production. Animal should be fed with balanced ration daily; grasscutter feeds are mainly green forage but it can be supplemented with concentrate, high in energy, protein and minerals. Examples of grasscutter feeds are:
• Cassava
• Potato
• Yam
• Cassava peels and scraps.
• Moringa
• Corn
• Sorghum
• Millet
• Rice
• Powdered oyster
• Snail or egg shells, with bone meal
• Groundnut
• Dry bread
• Corn or sorghum bran
• Groundnut and palm kernel cakes
• Wheat bran
• Brewers’ dried grain
• Cores from the crowns of palm, coconut or pineapple trees or banana plants
• Green papaya
• The trunk of the papaya
• Bamboo shoots
• Leaves and tops from pineapples
For proper feed utilization, the animals should be served fodder two hours before serving concentrates, once or twice a day, preferably in the morning and evening. Do not give damp fodder, Grassy fodder should be sun dried at least 24 hours before being served.
Concentrate can be served singly or in combination with fodder. It could be one ingredient or in mixtures. If using single ingredient concentrates, make sure to alternate when you give them. However, if the concentrate is a mix of two or three ingredients, then the same concentrate can be given every time. Any changes in concentrates should be made over four to five days in order to allow the digestive system to adapt. Bones, shells and pieces of wood help to wear down the teeth. After burning, bones can be given in powder form, mixed in with the concentrate, and can provide a source of minerals, especially phosphorus and calcium.
Clean and fresh water should be made available at all time.
Disease Management
Just like all creatures, grasscutters also face health threats that tend to affect their performance. Routine and regular inspection of the pen facilitate the exposure of any health threat or deviation in the health condition of the animal. Inspection starts from the pen facilities, to detect any threat or changes in the environment that can be detrimental to the animal health. Also, careful observation of the animal is another form of inspection that helps to detect change in the physiology of the grasscutter.
Proper hygiene must be maintained in the pen. The feeding and drinking equipment have to be managed and kept clean as fine as possible, to prevent the invasion of harmful microorganisms and pests. Regular washing of the equipment has to be done to ensure good health management. Repellants should be used on the farm to chase away any hardened and surviving pathogen.
Increase in the immunity of the animal is key and has to be achieved, this can be achieved through the administration of vitamins, sweetened lemon juice and mineral supplements at a regular interval, say every two weeks.
Clinical signs or symptoms, that can be observed in a sick grasscutter.
Every disease condition comes with a sign, they include:
• Rough or jaded fur:
The fur is the outermost covering of the grasscutter; it indicates the health status of the animal. When the animal is healthy, the fur looks shinny and tender but when you start to notice an irregular pattern or rough coat; it means there is an issue. To curb this condition, check the feed quality; also check the housing for dampness and cold, because these might be the reason behind the rough fur.
• Death of suckling babies:
This is a big disaster in farming, seeing the young animals drop dead is so displeasing. This can chiefly be caused by cold but if not, check the quality of the feed you are serving the lactating female. Disinfect the pen and relocate the animals to another pen.
• Loss of weight:
This is a common sign of illness; the grasscutter becomes emaciated and less active. This is normally caused by poor quality of feed or a sore in the teeth of the grasscutter. However, if any of these is not the reason behind the ailment, deworm the animals and give them long acting antibiotics. Also, disinfect the pen.
• Unmoving animal prostrate:
When you observe this in your grasscutter ; cull the grasscutter and do a thorough examination of the animal, check for cuts, sores, abscesses etc. Give sweetened lemon juice or antibiotics.
• Lump under the skin of a grasscutter:
This is called abscess; it is the accumulation of waste in the blood. To treat this, puncture the abscess with a needle and evacuate it completely. Apply powered antibiotics and inject long acting antibiotics.
To prevent such from occurring, check the quality of feed served, disinfect the pen and always serve the animals sweetened lemon juice.
• Diarrhoea:
If you notice the anus of your animal is always dirty and defecates are watery, it means your animal has diarrhoea. It is commonly caused by poor feed quality and sudden change in the concentrate feed. To curb this; check the feed quality, serve the animal antibiotics and reintroduce roughages or fibre feeds.
• Coughing and nasal discharge:
This is caused by powdered feed and damp environment; apply fat to the feed to check the powdery and ensure the floor is dry at all times.
• For any wound or injury sustained through fighting or mishandling, treat the wound and apply antibiotics
Sweetened lemon juice is very good for animals; it improves their immune system and protect the animals from any infection or disease. It is used as a curative and preventive measure; it can be added to the drinking water on a daily basis.
Proper management of grasscutter is very important; it increases the productivity of the business and reduces the cost of production. To run a successful animal production business, the animals have to be in good condition with the support of a proper management practice.

COMPLETE GUIDE TO GRASSCUTTER FARMING AND MANAGEMENT
Agriculture is a very lucrative profession; everyone needs food because food is one of the basic needs of life; if I say food, not just any food but quality food. This is what the body needs to serve us better. This is why farming is the profession for all and sundry, we are just pretending.
Animal protein is very important to the body, there are many sources of animal protein, poultry bird is the common source but there are other sources. Grasscutter is another good source, this micro livestock has turned many to millionaires over time.
What is a grasscutter?
Grasscutter, botanically called Thryonomys swinderianus and commonly called the Greater cane rat, is a micro livestock widely found in the grasslands, wet or marshy areas in Africa. They used to be widely hunted but they can now be domesticated for commercial purpose. Grasscutters are highly prolific animals as they are sexually matured and able to reproduce at around five to six months, with litter size of about twelve (12) in a year. They are easy to manage and grow faster under intensive system with the production of quality protein.
For you to start up a grasscutter business or any livestock business, housing is the first factor you must consider. Housing is key to grasscutter business.
Grasscutter Housing
The type of house to keep grasscutter must be safe and able to protect the animals for adverse weather, external threats like flood and predators. The house must be well ventilated. Grasscutters are best raised under intensive housing system, this increases their growth rate. The capacity of the house depends on the size and numbers of the animals to be reared. The space requirement for a group of reproductive grasscutters comprising one adult male and four females is 1.6m² to 2m² and The recommended surface area per adult animal in the pen is 0.2 m².
Materials for construction of the pen.
To construct a pen that is conducive for the growth and well-being of the animals, the building should be well ventilated and facilitates enough light to enhance rearing activities. The long sides of the structure are made of a low wall of about 1.5 m high, with the upper half covered with chicken wire. The roof can be made out of corrugated iron, straw or any other kind of waterproof material. The layout of the pens depends on the type of material used for their construction. Metal pens can be moved around, whereas brick pens will be fixed.
It is not recommended to use materials such as straw, bamboo, wood or matting because they can easily be eaten away by the grasscutters. There are basically two types of grasscutter farming cage; they are:
• The open pen
• The Closed pen.
The open pen: Open pens are those pens that are enclosed without any covering on top, and with a surface area of about 3 m² and 1.5 high. There is an opening in the side that gives easy access to the farm and animals.
The closed pen: These are pens that are covered with appropriate roofing material, and may be divided into different compartments. The height of the wall is lower (80 cm) and the surface area can vary between 2 and 3 m². The floor inside the building should be smooth and free from holes and crevices.
Also, there is a particular cage designed for easy handling, it's called the squeeze cage.
The squeeze cage is a compacted cage used to handle the animals more easily. The cage is designed such that its dimension is almost the same as the animal to be handled. The farmer can design this cage by building a rectangular cage with fine meshed screening. The size of the cage should base on the average weight of the animals in question. The squeeze cage should be built in such a way that the animal cannot turn around inside the cage.
Feeders and drinkers are component of any animal pen; feeding and drinking troughs can be made of cement or clay, and should be heavy enough so that the grasscutters cannot displace them. These are easy to make; all that is needed is to make a mould out of wood or other scrap material. Design one trough per three grasscutters.
Growth and maturity
Growth and maturity are quite crucial in this venture because it aids reproduction processes and planning.
A male grasscutter is sexually matured at 8 months reaching a minimum weight of 2.5kg. By nature, female animals mature rapidly. A female grasscutter is sexually matured at 26 week with a minimum body weight of 1.8kg.
During stocking, a male is enough to serve 10 females as the presence of male triggers the ovulation of the female. The gestation period of a grasscutter is approximately 22 weeks, meaning that a grasscutter can only reproduce twice in a year. A Grasscutter reproduces at least four offsprings per reproduction. These young animals suckle for 49 days before weaning.
Breed selection
It is crucial to select good breeds for stocking; breed selection should not be done at random. The selection should be made on the basis of weight; the male should be 0.5 to 1 kg heavier than the females. Male and female that are closely related should not mate, but females of the same parent can be bred alongside with a male of another parent. Animals in good conditions should be stocked, animals with rough coat or skin should be avoided, so also animals with weepy eyes.
The male grasscutter can mate with several females in a single period. The male, who can be identified by his wrinkled and brown genitals, is placed first in the pen so that it can mark his territory and thereby reduce the risk of fighting. The female, identified by the closeness of the anus to the genital area, is put in the pen with the male for 24 hours.
During the mating session, make sure the male is heavier than the female. There are generally two options for mating in captivity:
• Permanent mating: in this option, the male and females are kept together in the same pen, and only the young are removed after weaning.
• temporary mating: In this type, The female is placed in the same pen with the male at a particular point in time, and removed once the female is pregnant.
Each of these options looks interesting but comes with individual pros and cons depending on production goal.
In permanent mating, the breeding cycle of the female grasscutter is increased but the associated problems are:
• High rate of cannibalism.
• Inability to identify the mother of each offspring.
• There is less control of over production as there is regular mating among animals.
However, in temporary mating, there is little sense of organization here; there is full control of the animals’ affairs. The advantages of these options are:
• There is reduced risk of cannibalism.
• The mother of each offspring can be traced for other management practices.
For this to effectively take place, there are some basic prerequisites which are termed disadvantages, they include:
• It requires space, thus, increasing the cost of production and maintenance.
• There is reduced number of litter per female per year due to the controlled mating between animals.
Management of pregnant grasscutter.
After mating, pregnancy is expected. The period of gestation for a grasscutter is about 5 months. Pregnancy can be tested using this simple method. It involves the use of cotton bud. After about 5-8 weeks of mating, insert the cotton bud inside the genital (vagina) of the female grasscutter. If the cotton bud turns reddish in color, it means the animal is pregnant but if the color if the cotton bud doesn’t change, it means the animal is not pregnant. Such animal can be introduced to the male again for servicing.
After about 5 months of pregnancy, the female animal delivers. After parturition, the female needs special care and attention. It must be served high quality feed and provision of clean and adequate water to aid milk production. After forty days of parturition, weaning generally takes place. Weaning is the separation of the mother from its younger ones or offspring, this is necessary because the mother will grow weak as a result of the prolonged feeding of its offsprings.
During weaning, the young males are separated from the females and put together with other males of the same weight. The male can be identified by the distance between the genitals and the anus, which is twice as large as that of the young female.
Handling grasscutter
At this juncture, I must confess to you. Handling grasscutter is not an easy task; they can be harmful if not properly handled. The mode of handling depends greatly on their size.
• To handle a young grasscutter:
It is first lifted with its tail and holding the base of its tail and then grabbing its back slightly with the other hand. The animal is therefore turned to its back while its tail is stretched out at the same time.
• To handle a medium sized grasscutter:
This is quite technical; the animal is lifted with its tail and supported by grabbing the back with the other hand so that the weight is not much on the tail. The animal is then turned to its back.
• To handle a large grasscutter:
This cannot be lifted easily so it is recommended to handle it with aid of a squeeze cage.
Feeding grasscutter
In livestock production, feeding is key. It accounts for about 70%-75% of the total cost of production. Animal should be fed with balanced ration daily; grasscutter feeds are mainly green forage but it can be supplemented with concentrate, high in energy, protein and minerals. Examples of grasscutter feeds are:
• Cassava
• Potato
• Yam
• Cassava peels and scraps.
• Moringa
• Corn
• Sorghum
• Millet
• Rice
• Powdered oyster
• Snail or egg shells, with bone meal
• Groundnut
• Dry bread
• Corn or sorghum bran
• Groundnut and palm kernel cakes
• Wheat bran
• Brewers’ dried grain
• Cores from the crowns of palm, coconut or pineapple trees or banana plants
• Green papaya
• The trunk of the papaya
• Bamboo shoots
• Leaves and tops from pineapples
For proper feed utilization, the animals should be served fodder two hours before serving concentrates, once or twice a day, preferably in the morning and evening. Do not give damp fodder, Grassy fodder should be sun dried at least 24 hours before being served.
Concentrate can be served singly or in combination with fodder. It could be one ingredient or in mixtures. If using single ingredient concentrates, make sure to alternate when you give them. However, if the concentrate is a mix of two or three ingredients, then the same concentrate can be given every time. Any changes in concentrates should be made over four to five days in order to allow the digestive system to adapt. Bones, shells and pieces of wood help to wear down the teeth. After burning, bones can be given in powder form, mixed in with the concentrate, and can provide a source of minerals, especially phosphorus and calcium.
Clean and fresh water should be made available at all time.
Disease Management
Just like all creatures, grasscutters also face health threats that tend to affect their performance. Routine and regular inspection of the pen facilitate the exposure of any health threat or deviation in the health condition of the animal. Inspection starts from the pen facilities, to detect any threat or changes in the environment that can be detrimental to the animal health. Also, careful observation of the animal is another form of inspection that helps to detect change in the physiology of the grasscutter.
Proper hygiene must be maintained in the pen. The feeding and drinking equipment have to be managed and kept clean as fine as possible, to prevent the invasion of harmful microorganisms and pests. Regular washing of the equipment has to be done to ensure good health management. Repellants should be used on the farm to chase away any hardened and surviving pathogen.
Increase in the immunity of the animal is key and has to be achieved, this can be achieved through the administration of vitamins, sweetened lemon juice and mineral supplements at a regular interval, say every two weeks.
Clinical signs or symptoms, that can be observed in a sick grasscutter.
Every disease condition comes with a sign, they include:
• Rough or jaded fur:
The fur is the outermost covering of the grasscutter; it indicates the health status of the animal. When the animal is healthy, the fur looks shinny and tender but when you start to notice an irregular pattern or rough coat; it means there is an issue. To curb this condition, check the feed quality; also check the housing for dampness and cold, because these might be the reason behind the rough fur.
• Death of suckling babies:
This is a big disaster in farming, seeing the young animals drop dead is so displeasing. This can chiefly be caused by cold but if not, check the quality of the feed you are serving the lactating female. Disinfect the pen and relocate the animals to another pen.
• Loss of weight:
This is a common sign of illness; the grasscutter becomes emaciated and less active. This is normally caused by poor quality of feed or a sore in the teeth of the grasscutter. However, if any of these is not the reason behind the ailment, deworm the animals and give them long acting antibiotics. Also, disinfect the pen.
• Unmoving animal prostrate:
When you observe this in your grasscutter ; cull the grasscutter and do a thorough examination of the animal, check for cuts, sores, abscesses etc. Give sweetened lemon juice or antibiotics.
• Lump under the skin of a grasscutter:
This is called abscess; it is the accumulation of waste in the blood. To treat this, puncture the abscess with a needle and evacuate it completely. Apply powered antibiotics and inject long acting antibiotics.
To prevent such from occurring, check the quality of feed served, disinfect the pen and always serve the animals sweetened lemon juice.
• Diarrhoea:
If you notice the anus of your animal is always dirty and defecates are watery, it means your animal has diarrhoea. It is commonly caused by poor feed quality and sudden change in the concentrate feed. To curb this; check the feed quality, serve the animal antibiotics and reintroduce roughages or fibre feeds.
• Coughing and nasal discharge:
This is caused by powdered feed and damp environment; apply fat to the feed to check the powdery and ensure the floor is dry at all times.
• For any wound or injury sustained through fighting or mishandling, treat the wound and apply antibiotics
Sweetened lemon juice is very good for animals; it improves their immune system and protect the animals from any infection or disease. It is used as a curative and preventive measure; it can be added to the drinking water on a daily basis.
Proper management of grasscutter is very important; it increases the productivity of the business and reduces the cost of production. To run a successful animal production business, the animals have to be in good condition with the support of a proper management practice.

CHALLENGES OF GRASSCUTTER BREEDING

CHALLENGES OF GRASS-CUTTER PRODUCTION

1 Diseases and unexplainable Mortalities.
2 Simulating the appropriate environmental temperature and humidity.
3 Poor Processing and Marketing Plan
4 High cost of breeding stock.
5 Poor Training and Education
6 Poor research into gc and Information Dissemination
8 Poor or no record keeping
Lemon an sugar is not necessarily an immune booster but an anti stress and do deworming
1 Diseases and unexplainable Mortalities.
2 Simulating the appropriate environmental temperature and humidity.
3 Poor Processing and Marketing Plan
4 High cost of breeding stock.
5 Poor Training and Education
6 Poor research into gc and Information Dissemination
8 Poor or no record keeping
Lemon an sugar is not necessarily an immune booster but an anti stress and do deworming

Grasscutter Production And Management*

Grasscutter Production And Management*
Some basic facts about grasscutter with
regards to reproduction are as follows:
*Sexual maturity:* Male grasscutters mature
in 8 months or 32 weeks and they have a
minimum body weight of 2.5kg while the
female grasscutters mature in 6.5 months or
26 weeks having a minimum body weight
of 1.8kg.
*Sex ratio:* 1 male can service 4 to 10
females.
*Ovulation:* Just like female rabbits (does)
, female cane-rats start ovulating on
sighting a male
*Gestation period:* 152 days
*Numbers of litters per year:* 2 litters
*Number of young per litter:* 3-11 young
*Suckling period:* 40 days before weaning
*Selection for Breeding*
In grasscutter production, random selection
should be avoided. You should procure the
best animals from the nearest breeding
center or another grasscutter breeder.
Additionally, when making your selection, it
should be based on body weight. All the
females within a family should be having
almost the same body weight and the male
grasscutter should be 0.5-1kg heavier than
the females. Don’t buy or breed closely
related mating pairs; that is, a male closely
related to the females.
*Mating in grasscutters*
A male grasscutter is capable of mating with
many females grasscutters in a single
period. The male should be placed in the
mating pen and the female grasscutter is
moved from her own pen to the male’s
pen. Leave both in the pen for 24 hours.
*Note:* Don’t move the male to the female
pen because it may result to fight and
mating may not occur. Also, avoid mating a
male that is lighter than the female in
weight.
*There are two mating options in
grasscutter farming:*
1. *Permanent mating :* Here, the male and
female grasscutters are allowed to mate
together in the same pen but the young are
moved to another pen after they have been
weaned.
2. *Temporary mating :* Here, the female
is placed together with the male until she is
pregnant and she is moved to another pen.
Both permanent and temporary matings
have their advantages and disadvantages.
*Advantages of permanent mating*
Increased breeding cycle
*Disadvantage of permanent mating*
*Difficult to identify the mother of each
offspring
*Less control over reproduction
*Risk of cannibalism
*Risk of exhausting reproductive females
*Under-exploitation of the male
*Advantages of temporary mating*
*Clear identification of mother and
offspring
*Excellent management of breeding process
*Reduced risk of adult male killing
offspring
*Disadvantages of temporary mating*
Increased investment (several pens needed)
Need for larger space to house females
Reduced number of litters per female and
per year
*Gestation*
The gestation period for grasscutters or
cane-rats is 152 days. After your male and
female grasscutters must have mated with
each other, it is necessary to check if the
female is pregnant.
*Pregnancy test*
4-8 weeks after mating, carefully insert a
cotton bud into the genital of the female. If
it changes color to red, then that grasscutter
is pregnant. If there is no discolouration,
then the female is not pregnant.
*Birth*
Newborn grasscutters resemble adult ones.
Within a few hours, they can move around.
After the female has delivered, she must be
provided with enough feeds and water for
adequate milk production.
*Weaning grasscutters*
You should wean your newborn grasscutters
40 days after they are born. This is
necessary because any extension will make
the mother to grow weak due to prolonged
breastfeeding. When weaning, separate the
males from the females. You can identify a
male grasscutter by distancing the genitals
and anus, which is twice as large as those
in the young females.
*Feed* They feed on almost all kind of
root crops, can grass, different type of
leaves and vegetables and also there are
specially formulated fattening feed from the
feed mill just like the rabbit, fishery,
piggery and poultry feed sold in bags of
25kg and 50kg.
*Cost of breed stock* Ideal male breed
stock is sold for #10,000 naira while the
female is sold for #8,000 naira; therefore
we supply a family of 1 male and 5 female
for #50,000. And also 5 females with 2
meals for #60,000
To join our Watsapp
group chat or to Order for your for a colony. Call masterdeking on 08066074558
MASTER DE KING (DEKING FARM)

HOW TO BREED A GRASS
CUTTER
HOW START BREEDING GRASS CUTTER

ORIGIN AND PHYSICAL FEATURES
The grass cutter belongs to the order Rodent
and family Thryonomidae which
contains only genus Thryonomys. Dorst and
Dandelete (1979) recognized only
two species which they describe as greater
grasscutter
Thryonomys swinderianus Temminck and the
lesser grass cutter Thryonomys
gregorianus Temminck. This rodent is widely
known through Africa south of
Sahara and it is commonly referred as the grass
cutter, cane-rat or Cutting
grass.
They are heavily built, thick set with animals
with rounded muzzle, small
round ears, short tails and harsh bristly fur. They
have a peculiar bristle
tail which readily fractures near the base if
seized, much like the easily
atomized tail of the lizard, a phenomenon that is
of tremendous protective
value. The coarse bristly coat has no under-fur,
though under magnification
some sparsely scattered extremely fine straight
under-fur are visible.
The overall appearance is usually dark brown,
speckled with yellow or grey
above butty white below. The chin and throat
appear white. The head is a bit
small for the size of the body. The small
circular ear is covered strong and
well padded and are armed with powerful
straight claws. There are five
digits on the fore feet and four on the hind feet.
Females have three pairs
of mammary glands on the belly, while the male
testes are not visible
externally like other rodents.
The total body length (head to end tail) ranged
from 35 to 60cm and its tail
length ranges from 7 cm to 25cm. Grass cutter
grows to a considerable
weight. The mature male sometimes reach more
than 9kg while females can
attain between 5-7kg body weight. Its growth
rate is less than that of
rabbit of an improved breed and more than that
of the local rabbit in a
tropical environment.
The animal has many predators including
leopards, mongoose and python, in
addition to man.
MEAT QUALITIES AND USES
The meat qualities of the grass cutter compare
favorably with those of
domesticated livestock species. Mature live
weight ranges from 5 to 8kg. It
has an average dressing percentage of 65%.
However with the consumption of
the head an entrails this can reach 80%.
The nutritional value of grass cutter meat is as
good as those from domestic
animals. Beef, Lamb and pork also contain
higher fat percentage than meat
from the grass cutter.In fact grass cutter meat is
nutritionally superior to
some domestic meat because of its high protein
to fat ratio and higher
mineral contents. The meat quality is also leaner
and non-cholestrogenic.
The meat is very tasty when compared to both
domestic and familiar game
species. The grass cutter also play an important
role in traditional African
medicine for preparation of concoctions for
fertility etc. In Ghana, the
hair of the grass cutter is used to season food
just as much as its stomach
and intestinal contents. Also, the pancreas of
the grass cutter contains a
high concentration of insulin which is used in
local preparation for the
treatment of diabetes.
Pix of a matured grasscutter (t hryonomys
swinderianus temminck )

SOCIO-ECONOMIC IMPORTANCE:
In Ghana it has been ascertained that grass
cutter contributes to both local
and export earnings. About 73 tonnes of animals
are sold in a year and
recent surveys show that is is the Grass cutter
that dominates the bush meat
trade.
Most of this quantity is traded locally as fresh
or smoked form. Smoked
grass cutter is exported to US and Europe.
Grass cutter can be reared with minimal capital
outlay as inputs required
are very low.
Feed requirements for grass cutter in captivity
are low and it does not
compete with man for feedstuffs. It can therefore
serve as a considerable
income earner for the small scale Peri-urban or
rural livestock producer. A
farmer can also integrate grass cutter rearing
with other livestock farming
such as pigs, rabbits, sheep, ducks and poultry.

GRASS CUTTER HOUSING:
Grass cutter housing comprised of a stable and
cages/pens. stable is the
main building which houses the cages/pens. It is
a normal building
constructed in such a way to allow enough light
and ventilation (air).
The type of material for its construction depends
on the capital available
to the farmer/breeder. cement block, wood,
mud, brick, bamboo etc are some
of materials for construction grass cutter house
(stable).
Basically there are two rearing methods:
1.Rearing on the floor (floor hutch)
2.Rearing above the floor. (in meshed cages).
Floor hutch is the of rearing cage constructed
with either cement block,
brick or mud on the floor. Meshed cage on the
other hand is the type of
rearing cage made from combination of wood
and wired-mesh.
Both of them however comprised of two
compartments which permit easy
movement of animal.
They can also be made into two three tiers
(layers) system in order to optimize space.
The hutches are placed within the building, and
the dimension with other features can be length
can be 2.0 m X 1.5 m width X height 0.75
meters.
COMPARTMENT:-this must be two compartment
each of 1.0 meters X 1.5 meters X 0.75 meters,
it must have a small opening way of Cm X Cm
and must be made at the bottom of the
partitioning wall between both
compartments.This allows for easy movement of
the grass cutters from one room to the
other.And the top must be covered with a wire
mesh or bamboo with an opening (entrance of
30cm X 25cm).

CAGE HOUSING SYSTEM
A farmer can also rear a grasscutter in a well
covered wood wire cage, the designs of cages
for grasscutter are different with purposes.The
cages dimension and features are:length x width
x height i.e 1.6 meters x 0.6 meters x 0.45
meters, it can also be in these ranges 1.5
meters x 1.0 meters x 0.4 meters, and it must
have two longitudinal side: lenght x width: 30 cm
x 25 cm, you can see the image of the wood wire
cage system for grass cutter housing (3
steps: upstair wood wire cage system.

STANDARD CAGE HOUSING SYSTEM
The dimension of the standard individual cages
are length x width x height: 0.5 m x 0.5 m x 0.4
m and the entrance must be: 18 cm x 18 cm
which must be one on one side only.
here is a sample picture of a standard cage
housing system:-

A RETENTION CAGES:
i. Grasscutter above 5 kg: 38 cm x 14cm x 14
cm.
ii. Grasscutter between 1 and 3kg: 30 cm x 10
cm.
iii.Grasscutter between 3 and 5 kgs: 33cm x 13
cm x 13 cm.
In Hutches, 8 grasscutter are kept inside the
house, in colony cages we can put between 18 to
24 grasscutters together and same also adult
castrated males can be put in the colony cages,
and they may be up to 12 per cage.
Image of animal population for one cage floor
weaners (between two to four month old).

REPRODUCTION AND BREEDING.
A male and female grass cutters attains their
sexual maturity at 5 and 7
months respectively. A male grass cutter can be
paired with 3-5
females.There are two methods of mating -
permanent and controlled mating
methods. The gestation period is 5 months,
meaning that with good
management, the animal an litter twice in a
year.
The average litter size is always four. They
young ones can be weaned in
about 4-6 weeks, after a resting period of about
10 days mother can be
paired with the male again.
HANDLING.
Grass cutter can be handled either by tails or by
the limb. For easy
handling, wire mesh cage can be used to move
animal from one place to other.

FEEDS AND FEEDING OF GRASS CUTTER
COLONIES.
Whatever be the choice of grass cutter farming
embarked upon by farmer
(breeding or fattening), provision of quality and
adequate nutrition is
essential to the success of each grass cutter
rearing. Balanced feeding that
takes into consideration nutritional requirements
and regularity of feeding
are essential factors responsible for the animals'
good growth, health and
reproduction.

FEED INGREDIENTS
1)FORAGE
Grass cutters normally prefer grass with
succulent stalk and such quality
can be found in the following wild or cultivated
grasses among others.
.Elephant grass (pennisetum purpureum)
.Sugar cane (Saccharum spp)
.Guinea grass (Panicum maximum)
.Giant star grass(Andropogon gayanus)
.Maize stem (zea mays)
.Rice stalks (Oryza spp.)
ii)FOOD CROP CULTIVATED/PRODUCTS
.Rice
.Maize
.Guinea Corn
.Millet
.Cassava
NUTRIENTS
Balanced feed can be found in a proportional
mixture of the following feed
ingredients that are used in preparing the
supplementary feed. Examples of
feed ingredients include:
.Maize/millet------------------ cassava
.Brewers dried grain (BDG)-----Leucaena
leucocephala
.Corn bran/wheat offal---------Oyster/snail shell
.Palm kernel cake (PKC)--------Bone meal
.Soyabean cake (SBC)-----------Salt
.Groundnut cake(GNC)-----------Vitamin -mineral
premix

DISEASE MANAGEMENT.
As said earlier, good hygiene practice reduces
the risk of disease outbreak
in grass cutters rearing. The most important
disease in grass cutter rearing
include the following:
1.ENTEROTOXAEMIA: This is caused by a
bacterium clostridium perfringens. The
organism produces toxins which are absorbed
into the circulatory system of
the grass cutters thereby causing moralities.
The most obvious sign seen is the paralysis/
pedaling of the hind legs.
Other signs are seen during post mortern.
vaccine against this condition is
available. Antibiotics (Ciprofloxacin,
Enrofloxacin) are used in the
treatment. It is useful to sprinkle some
superphosphate on pen floor
bi-monthly to break the development circle of
clostridia orgamisms.
2.STAPHYLOCOCCAEMIA:-This is caused by a
bacterium, staphylococcus Aurelius.
Most of the signs of this disease are seen at
post mortem but discharges
from the nostrils and vagina could be seen.
Antibiotics are also employed in
its treatment.
3.COCCIDIOSIS:This is caused by organism of
the Eimeria family. Symptoms of
the disease include diarrhea, prostration e.t.c
Drugs of the Amprolium
family are used in its treatment.
4.WORM INFECTION:-This is caused by worms
and can be gotten from the cane
grass being fed to the grass cutter. This is why
the cane grass must be put
in the sum before being fed to the grass cutters
in order for the larvae of
the worms to destroyed. Regular deworming
should be carried out.
5.ECTOPARASTES: e.g ticks. These could be
introduced into the pens through
inadequately dried forage. Administration of
Ivomec is used to control
ticks. Chemical bath/dipping of the grass cutters
could also be useful.

NUTRITIONAL HYGIENE TIPS TO PREVENT
FOOD POISONING AND DIGESTIVE ISSUES.
Do not serve ripe fruit to the
animals.
Do not serve animals with grass cut
the same day i.e the grass cut in
late afternoon for the next feeding
day.
Remove leftover forage and
concentrate before feeding fresh
feed.
Do not serve supplementary feed
before forage in the morning.
Avoid animals forage that is not yet
mature (too young)
Clean water and feed troughs each
day before feeding.
Provide enough water and feed
troughs in the pen.
Do not feed mouldy forage and
concentrate.
Do not source for grasses from
unhygenic places where human
waste is deposited.

MASTER DE KING
08066074558 OR 08093880909



A-Z OF GRASSCUTTER FARMING

MASTER DE KING (DEKING FARM)

HOW TO BREED A GRASS
CUTTER
HOW START BREEDING GRASS CUTTER

ORIGIN AND PHYSICAL FEATURES
The grass cutter belongs to the order Rodent
and family Thryonomidae which
contains only genus Thryonomys. Dorst and
Dandelete (1979) recognized only
two species which they describe as greater
grasscutter
Thryonomys swinderianus Temminck and the
lesser grass cutter Thryonomys
gregorianus Temminck. This rodent is widely
known through Africa south of
Sahara and it is commonly referred as the grass
cutter, cane-rat or Cutting
grass.
They are heavily built, thick set with animals
with rounded muzzle, small
round ears, short tails and harsh bristly fur. They
have a peculiar bristle
tail which readily fractures near the base if
seized, much like the easily
atomized tail of the lizard, a phenomenon that is
of tremendous protective
value. The coarse bristly coat has no under-fur,
though under magnification
some sparsely scattered extremely fine straight
under-fur are visible.
The overall appearance is usually dark brown,
speckled with yellow or grey
above butty white below. The chin and throat
appear white. The head is a bit
small for the size of the body. The small
circular ear is covered strong and
well padded and are armed with powerful
straight claws. There are five
digits on the fore feet and four on the hind feet.
Females have three pairs
of mammary glands on the belly, while the male
testes are not visible
externally like other rodents.
The total body length (head to end tail) ranged
from 35 to 60cm and its tail
length ranges from 7 cm to 25cm. Grass cutter
grows to a considerable
weight. The mature male sometimes reach more
than 9kg while females can
attain between 5-7kg body weight. Its growth
rate is less than that of
rabbit of an improved breed and more than that
of the local rabbit in a
tropical environment.
The animal has many predators including
leopards, mongoose and python, in
addition to man.
MEAT QUALITIES AND USES
The meat qualities of the grass cutter compare
favorably with those of
domesticated livestock species. Mature live
weight ranges from 5 to 8kg. It
has an average dressing percentage of 65%.
However with the consumption of
the head an entrails this can reach 80%.
The nutritional value of grass cutter meat is as
good as those from domestic
animals. Beef, Lamb and pork also contain
higher fat percentage than meat
from the grass cutter.In fact grass cutter meat is
nutritionally superior to
some domestic meat because of its high protein
to fat ratio and higher
mineral contents. The meat quality is also leaner
and non-cholestrogenic.
The meat is very tasty when compared to both
domestic and familiar game
species. The grass cutter also play an important
role in traditional African
medicine for preparation of concoctions for
fertility etc. In Ghana, the
hair of the grass cutter is used to season food
just as much as its stomach
and intestinal contents. Also, the pancreas of
the grass cutter contains a
high concentration of insulin which is used in
local preparation for the
treatment of diabetes.
Pix of a matured grasscutter (t hryonomys
swinderianus temminck )

SOCIO-ECONOMIC IMPORTANCE:
In Ghana it has been ascertained that grass
cutter contributes to both local
and export earnings. About 73 tonnes of animals
are sold in a year and
recent surveys show that is is the Grass cutter
that dominates the bush meat
trade.
Most of this quantity is traded locally as fresh
or smoked form. Smoked
grass cutter is exported to US and Europe.
Grass cutter can be reared with minimal capital
outlay as inputs required
are very low.
Feed requirements for grass cutter in captivity
are low and it does not
compete with man for feedstuffs. It can therefore
serve as a considerable
income earner for the small scale Peri-urban or
rural livestock producer. A
farmer can also integrate grass cutter rearing
with other livestock farming
such as pigs, rabbits, sheep, ducks and poultry.

GRASS CUTTER HOUSING:
Grass cutter housing comprised of a stable and
cages/pens. stable is the
main building which houses the cages/pens. It is
a normal building
constructed in such a way to allow enough light
and ventilation (air).
The type of material for its construction depends
on the capital available
to the farmer/breeder. cement block, wood,
mud, brick, bamboo etc are some
of materials for construction grass cutter house
(stable).
Basically there are two rearing methods:
1.Rearing on the floor (floor hutch)
2.Rearing above the floor. (in meshed cages).
Floor hutch is the of rearing cage constructed
with either cement block,
brick or mud on the floor. Meshed cage on the
other hand is the type of
rearing cage made from combination of wood
and wired-mesh.
Both of them however comprised of two
compartments which permit easy
movement of animal.
They can also be made into two three tiers
(layers) system in order to optimize space.
The hutches are placed within the building, and
the dimension with other features can be length
can be 2.0 m X 1.5 m width X height 0.75
meters.
COMPARTMENT:-this must be two compartment
each of 1.0 meters X 1.5 meters X 0.75 meters,
it must have a small opening way of Cm X Cm
and must be made at the bottom of the
partitioning wall between both
compartments.This allows for easy movement of
the grass cutters from one room to the
other.And the top must be covered with a wire
mesh or bamboo with an opening (entrance of
30cm X 25cm).

CAGE HOUSING SYSTEM
A farmer can also rear a grasscutter in a well
covered wood wire cage, the designs of cages
for grasscutter are different with purposes.The
cages dimension and features are:length x width
x height i.e 1.6 meters x 0.6 meters x 0.45
meters, it can also be in these ranges 1.5
meters x 1.0 meters x 0.4 meters, and it must
have two longitudinal side: lenght x width: 30 cm
x 25 cm, you can see the image of the wood wire
cage system for grass cutter housing (3
steps: upstair wood wire cage system.

STANDARD CAGE HOUSING SYSTEM
The dimension of the standard individual cages
are length x width x height: 0.5 m x 0.5 m x 0.4
m and the entrance must be: 18 cm x 18 cm
which must be one on one side only.
here is a sample picture of a standard cage
housing system:-

A RETENTION CAGES:
i. Grasscutter above 5 kg: 38 cm x 14cm x 14
cm.
ii. Grasscutter between 1 and 3kg: 30 cm x 10
cm.
iii.Grasscutter between 3 and 5 kgs: 33cm x 13
cm x 13 cm.
In Hutches, 8 grasscutter are kept inside the
house, in colony cages we can put between 18 to
24 grasscutters together and same also adult
castrated males can be put in the colony cages,
and they may be up to 12 per cage.
Image of animal population for one cage floor
weaners (between two to four month old).

REPRODUCTION AND BREEDING.
A male and female grass cutters attains their
sexual maturity at 5 and 7
months respectively. A male grass cutter can be
paired with 3-5
females.There are two methods of mating -
permanent and controlled mating
methods. The gestation period is 5 months,
meaning that with good
management, the animal an litter twice in a
year.
The average litter size is always four. They
young ones can be weaned in
about 4-6 weeks, after a resting period of about
10 days mother can be
paired with the male again.
HANDLING.
Grass cutter can be handled either by tails or by
the limb. For easy
handling, wire mesh cage can be used to move
animal from one place to other.

FEEDS AND FEEDING OF GRASS CUTTER
COLONIES.
Whatever be the choice of grass cutter farming
embarked upon by farmer
(breeding or fattening), provision of quality and
adequate nutrition is
essential to the success of each grass cutter
rearing. Balanced feeding that
takes into consideration nutritional requirements
and regularity of feeding
are essential factors responsible for the animals'
good growth, health and
reproduction.

FEED INGREDIENTS
1)FORAGE
Grass cutters normally prefer grass with
succulent stalk and such quality
can be found in the following wild or cultivated
grasses among others.
.Elephant grass (pennisetum purpureum)
.Sugar cane (Saccharum spp)
.Guinea grass (Panicum maximum)
.Giant star grass(Andropogon gayanus)
.Maize stem (zea mays)
.Rice stalks (Oryza spp.)
ii)FOOD CROP CULTIVATED/PRODUCTS
.Rice
.Maize
.Guinea Corn
.Millet
.Cassava
NUTRIENTS
Balanced feed can be found in a proportional
mixture of the following feed
ingredients that are used in preparing the
supplementary feed. Examples of
feed ingredients include:
.Maize/millet------------------ cassava
.Brewers dried grain (BDG)-----Leucaena
leucocephala
.Corn bran/wheat offal---------Oyster/snail shell
.Palm kernel cake (PKC)--------Bone meal
.Soyabean cake (SBC)-----------Salt
.Groundnut cake(GNC)-----------Vitamin -mineral
premix

DISEASE MANAGEMENT.
As said earlier, good hygiene practice reduces
the risk of disease outbreak
in grass cutters rearing. The most important
disease in grass cutter rearing
include the following:
1.ENTEROTOXAEMIA: This is caused by a
bacterium clostridium perfringens. The
organism produces toxins which are absorbed
into the circulatory system of
the grass cutters thereby causing moralities.
The most obvious sign seen is the paralysis/
pedaling of the hind legs.
Other signs are seen during post mortern.
vaccine against this condition is
available. Antibiotics (Ciprofloxacin,
Enrofloxacin) are used in the
treatment. It is useful to sprinkle some
superphosphate on pen floor
bi-monthly to break the development circle of
clostridia orgamisms.
2.STAPHYLOCOCCAEMIA:-This is caused by a
bacterium, staphylococcus Aurelius.
Most of the signs of this disease are seen at
post mortem but discharges
from the nostrils and vagina could be seen.
Antibiotics are also employed in
its treatment.
3.COCCIDIOSIS:This is caused by organism of
the Eimeria family. Symptoms of
the disease include diarrhea, prostration e.t.c
Drugs of the Amprolium
family are used in its treatment.
4.WORM INFECTION:-This is caused by worms
and can be gotten from the cane
grass being fed to the grass cutter. This is why
the cane grass must be put
in the sum before being fed to the grass cutters
in order for the larvae of
the worms to destroyed. Regular deworming
should be carried out.
5.ECTOPARASTES: e.g ticks. These could be
introduced into the pens through
inadequately dried forage. Administration of
Ivomec is used to control
ticks. Chemical bath/dipping of the grass cutters
could also be useful.

NUTRITIONAL HYGIENE TIPS TO PREVENT
FOOD POISONING AND DIGESTIVE ISSUES.
Do not serve ripe fruit to the
animals.
Do not serve animals with grass cut
the same day i.e the grass cut in
late afternoon for the next feeding
day.
Remove leftover forage and
concentrate before feeding fresh
feed.
Do not serve supplementary feed
before forage in the morning.
Avoid animals forage that is not yet
mature (too young)
Clean water and feed troughs each
day before feeding.
Provide enough water and feed
troughs in the pen.
Do not feed mouldy forage and
concentrate.
Do not source for grasses from
unhygenic places where human
waste is deposited.

MASTER DE KING
08066074558 OR 08093880909